View LTW-5630SP660_8945119.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lite-on dcc release bns-od-fc001/a4 lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto specific lightingproduct data sheetLTW-5630SP660 spec no. :ds23-2016-0139effective date: 02/16/2017 revision: a
1/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 1. description the liteon 5630 product series is a wide beam angle standard-dimension package , combining the lifetime and reliability advantages of light emitting diodes with the bright ness of conventional lighting. it gives you total d esign freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional l ighting technologies . 1.1 features package in 8mm tape on 7" diameter reels. compatible with automatic placement equipment. compatible with infrared and vapor phase reflow sol der process. eia std package. i.c. compatible. meet green product and pb-free(according to rohs)
2/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 2. outline dimensions part no. lens color source color LTW-5630SP660 clean alingap red notes: 1. all dimensions are in millimeters. 2. tolerance is 0.2 mm (.008") unless otherwise no ted.
3/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 3. absolute maximum ratings at t a =25c parameter symbol rating unit dc forward current i f 200 ma pulsed forward current (*1) i fp 300 ma power dissipation p d 470 mw operating temperature t opr -40~+85 o c storage temperature t stg -40~+100 o c dice temperature t j 110 o c notes : 1. 1/10 duty cycle, pulse width 10msec.
4/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 4.1 typical performance parameter symbol values unit test condition radiant flux e min 110 mw i f =150ma typ. 127 max. 177 luminous flux v typ. 8.17 lm photon flux ppf typ. 0.695 mol/s peak wavelength w p min 650 nm typ. 660 max. 670 dominant wavelength wd typ. 642 nm spectral line half-width typ. 20 nm viewing angle 2 1/2 typ. 120 deg forward voltage v f min 2.0 v typ. 2.2 max. 2.8 reverse current i r max. 5 a v r =-10v notes 1. radiant flux and peak wavelength are the total fl ux output as measured with an integrating sphere. 2. radiant flux, peak wavelength and forward voltage classification code are marked on each packing bag . 3. cas-140b is the test standard for radiant flux, pea k wavelength and forward voltage. 4. electro-optical characteristics
5/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 4.2 typical electrical / optical characteristics cu rves fig1. relative spectrum of emission 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% relative intensity (%) 90 60 30 0 50 100 60 30 0 fig2. radiation characteristics
6/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 fig3. voltage vs. forward current fig.4. forward current vs. relative radiant flux
7/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 fig.5. forward current vs. peak wavelength fig.6. board temperature vs. peak wavelength
8/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 5. bin code list forward voltage spec. table v f bin if =150ma, ta=25c min max 3 2.0 2.2 4 2.2 2.4 5 2.4 2.6 6 2.6 2.8 radiant flux (mw) table mw bin if =150ma, ta=25c min max r5 110 121 r6 121 133 r7 133 146 r8 146 161 r9 161 177 peak wavelength spec. table w p bin if =150ma, ta=25c min max p7 650 655 p8 655 660 p9 660 665 p10 665 670 notes 1. the flux is operated performance with forward cu rrent 150ma per die. 2. flux is the total luminous flux output as initia l measured with an integrated sphere. 3. forward voltage (v f ) measurement allowance is 0.1v. 4. flux measurement allowance is 10%. 5. wavelength allowance is 5nm
9/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 notes: full rank on label example: 4/r6/p7 forward voltage rank radiant flux rank peak wavelength rank 4 r6 p7
10/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 6. reflow soldering characteristics profile feature lead free assembly average ramp-up rate (t smax to t p ) 3c / second max preheat temperature min (t smin ) 150c preheat temperature max (t smax ) 200c preheat time (t smin to t smax ) 60 C 180 seconds time maintained above temperature (t l ) 217c time maintained above time (t l ) 60 C 150 seconds peak / classification temperature (t p ) 260c time within 5c of actual peak temperature (t p ) 5 seconds ramp C down rate 6c / second max time 25c to peak temperature 8 minutes max
11/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 notes: 1. the leds can be soldered using the reflow solderi ng or hand soldering method. the recommended hand soldering condition is 350 c max. and 2 secs max. for one time only, and the recommended reflow solde ring condition is 260 c max. and 5 secs max. for three times max. 2. all temperatures refer to topside of the package, measured on the package body surface. 3. the soldering condition referring to j-std-020b. t he storage ambient for the leds should not exceed 30 c temperature or 70% relative humidity. it is recomme nded that leds out of their original packaging are s oldered within one week. for extended storage out of their original packaging, it is recommended that the leds were stored in a sealed container with appropriate desic cant, or desiccators with nitrogen ambient. if the leds were unpacked more than 168hrs, baking the leds at 60 c for 24hrs before soldering process. 4. the soldering profile could be further referred to different soldering grease material characterist ic. the grease vendor will provide this information. 5. a rapid-rate process is not recommended for the leds cooling down from the peak temperature. 6. although the recommended reflow conditions are sp ecified above, the reflow or hand soldering conditi on at the lowest possible temperature is desirable for th e leds. 7. liteon cannot make a guarantee on the leds which have been already assembled using the dip soldering method.
12/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 7. reliability test no test item test condition duration number of damaged 1 operating test ta=25c, if=150ma 1,000hrs 0/20 2 high temp. operating test ta=85c, if=150ma 1,000hrs 0/20 3 high humidity operating test ta=85c, rh=85%, if=1 50ma 1,000hrs 0/20 4 low temp. operating test ta=-40c, if=150ma 1,000hrs 0/20 5 high temp. storage test ta=100c 1,000hrs 0/20 6 low temp. storage test ta=-40c 1,000hrs 0/20 7 high humidity .storage test ta=60c, rh=90% 1,000hrs 0/20 8 temperature cycle test ta= -40c, 30min ~25c, 5min ~100c, 30min 100 cycle 0/20 9 resistance to soldering heat (reflow soldering) tsld=260c , 10sec 2 times 0/20 criteria for judging the damage item symbol test condition criteria for judgment min. max. forward voltage v f i f =150 ma initial value 1.1 radiant flux e i f= 150 ma initial value 0.7 D reverse current i r v r =-10v 5 a
13/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 8. user guide cleaning do not use unspecified chemical liquid to clean led they could harm the package. if cleaning is necessa ry, immerse the led in ethyl alcohol or isopropyl alcohol at nor mal temperature for less than one minute. recommend printed circuit board attachment pad infrared / vapor phase reflow soldering package dimensions of tape note: all dimensions are in millimeters (inches). package dimensions of reel
14/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 notes: 1. empty component pockets sealed with top cover tap e. 2. 7 inch reel-3000 pieces per reel. 3. minimum packing quantity is 500 pieces for remai nders. 4. the maximum number of consecutive missing lamps is two. 5. in accordance with eia-481-1-b specifications.
15/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 9. cautions 9.1 application the leds described here are intended to be used for ordinary electronic equipment (such as office equip ment, communication equipment and household applications) .consult liteons sales in advance for information o n applications in which exceptional reliability is re quired, particularly when the failure or malfunctio n of the leds may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment , medical and life support systems and safety devices). 9.2 storage this product is qualified as moisture sensitive lev el 3 per jedec j-std-020 precaution when handing this moisture sensitive product is important to ens ure the reliability of the product. the package is sealed: the leds should be stored at 30c or less and 90%rh or less. and the leds are limited to use within one year, while the leds is packed in moisture-proof pac kage with the desiccants inside. the package is opened: the leds should be stored at 30c or less and 60%rh or less. moreover, the leds are limited to solder process within 168hrs. if exceeding the storage lim iting time since opened, that we recommended to baking leds at 60c at least 24hrs. to seal the rema inder leds return to package, its recommended to be with workable desiccants in original package. 9.3 cleaning use alcohol-based cleaning solvents such as isoprop yl alcohol to clean the led if necessary. 9.4 drive mode an led is a current-operated device. in order to ensu re intensity uniformity on multiple leds connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each led as shown in circuit a below (a) recommended circuit. (b) the brightness of each led might appear different due to the differences in the i-v characteristics o f those leds. circuit model a circuit model b
16/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 9.5 esd (electrostatic discharge) static electricity or power surge will damage the l ed. suggestions to prevent esd damage: use of a conductive wrist band or anti-electrostati c glove when handling these leds. all devices, equipment, and machinery must be proper ly grounded. work tables, storage racks, etc. should be properly grounded. use ion blower to neutralize the static charge whic h might have built up on surface of the leds plastic lens as a result of friction between leds du ring storage and handling. esd-damaged leds will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or no lightup at low currents.to verify for esd damage, check for light up and v f of the suspect leds at low currents.the v f of good leds should be >2.0v@0.1ma for ingan produ ct and >1.4v@0.1ma for alingap product. 9.6 suggested checking list: training and certification 1. everyone working in a static-safe area is esd-certi fied? 2. training records kept and re-certification dates monitored? static-safe workstation & work areas 1. static-safe workstation or work-areas have esd sign s? 2. all surfaces and objects at all static-safe works tation and within 1 ft measure less than 100v? 3. all ionizer activated, positioned towards the uni ts? 4. each work surface mats grounding is good? personnel grounding 1. every person (including visitors) handling esd sens itive (esds) items wear wrist strap, heel strap or conductive shoes with conductive floo ring? 2. if conductive footwear used, conductive flooring also present where operator stand or walk? 3. garments, hairs or anything closer than 1 ft to esd items measure less than 100v*? 4. every wrist strap or heel strap/conductive shoes checked daily and result recorded for all dls? 5. all wrist strap or heel strap checkers calibratio n up to date?
17/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 note: *50v for blue led. device handling 1. every esds items identified by eia-471 labels on item or packaging? 2. all esds items completely inside properly closed sta tic-shielding containers when not at static-safe workstation? 3. no static charge generators (e.g. plastics) insi de shielding containers with esds items? 4. all flexible conductive and dissipative package m aterials inspected before reuse or recycle? others 1. audit result reported to entity esd control coordin ator? 2. corrective action from previous audits completed ? 3. are audit records complete and on file? 9.7 others: do not put any pressure on the light emitting surfa ce either by finger or any hand tool and do not stack the products. stress or pressure may cause da mage to the wires of the led array. this product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions do not use sulfur-containing materials in commercia l products including the materials such as seals and adhesives that may contain sulfur. do not put this product in a place with a lot of mo isture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (cl, h 2 s, nh 3 , so 2 , no x , etc.), exposure to a corrosive environment may affect silver plating. the appearance and specifications of the product ma y be modified for improvement without prior notice
18/18 p art no. : ltw - 5630 sp66 0 bns-od-fc002/a4 specific lighting LTW-5630SP660 revision history: revision date: last version: version page content of change date record 1.0 all 12/14/2016 1.1 page 8. wave length shift related to current & wave length shift related to temperature 01/13/2017 1.2 page 5.9 new mw bin 01/18/2017 1.3 pag.9 new bin table 01/25/2017

▲Up To Search▲

Price & Availability of LTW-5630SP660

	To Download LTW-5630SP660 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .